FHC_45_50_62

General information & application F45HC, F50HC and F62HC are cubic light industrial air coolers for general application in small to medium-sized cooling, freezing and working rooms. Benefits • Top Performance: advanced high efficiency heat exchanger • Environment & installation-cost friendly: very low refrigerant charge and EC fans • Short delivery time • Even cold room conditions: optimized air flow and throw • Easy installation and maintenance: fully accessible casing, hinged draintray • Long life cycle: first class materials used • Fit for purpose: wide capacity range and options Refrigerants Capacity range (SC2 with R404) Air flow Min. room temperature Design pressure Refrigerant Max working pressure HFC* 24 bar CO 2 45-60 bar Brine 10 bar * Fluid group 2 according to EN 378 Each heat exchanger is leak tested with dry air and finally supplied with a dry air pre-charge. Fitted with schräder valve on the suction connection for testing purposes (only for HFC and CO2 units). Coil High-efficiency coil manufactured from internally grooved Cu tubes and louvered aluminium fins. Standard fin spac- ings: 4.5, 6.0, 7.5 and 10.0 mm. Casing Durable galvanized steel casing, powder coated RAL 9003. Dismountable and openable casing for cleaning and inspecting purposes. Fitted with hinged drain tray. Fan motors 1 to 4 fans fitted with high efficiency AC or EC fan motors, available in three fan diameters (450, 500 and 630 mm) drawing through the coil. Options • Corrosion protection: Alupaint fins (AP) • Electric defrost (E) - both in coil and in drain tray, connected to dedicated connection box • Hot gas defrost (G) - hot gas in coil, electrical in drain tray • Fan shroud heater • EC fans (0-10 V) + Modbus • Fan motors wired to a central connection box • Fan switches • Insulated drain tray • Shut-up sock • Textile tube adapter • Air streamer • Top connections - for brine models F62HC FH45HC - F50HC - F62HC Cubic light industrial air coolers F50HC 5.4 up to 65.2 kW 4,600 up to 34,800 m3/h - 35 °C