CHS_LHS_CSA_LSA_CHSW_LHSW

LU-VE Exchangers is a trademark registered and owned by LU-VE Group. LU-VE Exchangers reserves the right to change specifications without prior notification. 31675086EN-01 Certifications The LU-VE Exchangers quality system is in accordance with ISO 9001. All products are manufactured according to PED regulations. LU-VE Group participates in the ECP program for HE. Check ongoing validity of certificate*: www.eurovent-certification.com Selection Selection and pricing is to be performed with our air heat exchanger selection software Refriger. Selection output includes all relevant technical data and dimensional drawings. Code description 1 Industrial air coolers for cold room (CS=Compact Surface, LS=Large Surface) 2 Fan diameter (45=450, 50=500, 62=630, 71=710, 80=800, 90=910, 95=950 mm) 3 Technology (H=Hitec® for HFC and CO2, blank=for ammonia and brine) 4 Refrigerant system (blank=HFC, A=ammonia, W=brine, in case of CO2 see pos. 8) 5 Model type 6 Defrost system (N=air defrost, E=electric defrost, G=hot-gas defrost in coil + electric defrost in drain tray, GB=hot-gas defrost both in coil drain tray) 7 Fin spacing (4=4.5, 6=6.0, 7=7.5, 10=10.0, 12=12.0 mm) 8 Application (DX CO2=direct expansion for CO2, PB=pumped bottom feed for ammonia, PT=pumped top feed for ammonia) CS 63 H * 2214 E 6 * 1 2 3 4 5 6 7 8 *Ammonia and Brine refrigerants not covered by Eurovent certification CS, LS, ECS Industrial air coolers for cold rooms Coil Refrigerant Fins Tubes Headers HFC Al* Cu Cu Ammonia Al* SS 304** SS 304** CO2 Al* Cu Cu Brine Al* Cu Cu * Alupaint as optional; **Stainless steel 316 on request • High-efficiency TURBOFIN® aluminum fins with special configuration of the louvre profile to reduce dehumidification and frost formation. • High-efficiency small-diameter copper tubes with internal helical grooving, designed for optimal evaporation of the new refrigerant fluids. Stainless steel tubes for ammonia refrigerant. • S tandard fin spacings 4.5, 6, 7.5, 10 and 12 mm. Options • Shut up sock • Textile tube adapter • Air streamer • Insulated rear air director cover • Unit coolers switches • Unit coolers wiring • Insulated drain tray • Stainless steel casing and coil frame • Hinged fan shroud - not available for Ø 450 mm • Mounting feet - for Ø 500, 630, 710, 800, 910, 950 mm • Inclined motor • Motorized rear shutter • Electric defrost (E) • Fan shroud heater • Hot-gas defrost in coil+electric defrost in drain tray (G) • Hot-gas defrost both in coil and drain tray (GB) • Water defrost (SB) • Hot glycol defrost both in coil and drain tray (HG) • Hot glycol defrost in coil+electric defrost in drain tray (HE) • Hot glycol defrost in drain tray only (HB) • Hot glycol defrost in coil only (HC) • Blow-trough fan 1 Industrial air coolers for CO2 applications 2 Fan diameter (45=450, 50=500, 62=630, 71=710, 80=800 mm) 3 Model type 4 Defrost system (N=air defrost, E=electric defrost, G=hot-gas defrost in coil + electric defrost in drain tray, GB=hot-gas defrost both in coil and drain tray) 5 Fin spacing (4=4.5, 6=6.0, 7=7.5, 10=10.0, 12=12.0 mm) ECS 63 2214 E 6 1 2 3 4 5